AXXAIR SAXX-210 Originalbetriebsanleitung Seite 85

INNOVATIVE ORBITAL SOLUTIONS
Export / Import / start with empty memory:
- An export updates the following files on the key :
- An import imports the following files from the key:
An import does not import the calibration files or the counter file.
- When the SAXX starts up and its memory is empty (after a software update for example), the
SAXX remains on the home screen while it imports all the files from the "Recipe" folder.
Copy programs and / or configuration from one generator to another:
- On the SAXX from which you want to copy the programs, export the screen to the original USB
key.
On a computer, recover the 4 "Prog" files (00002_Prog1, 00003_Prog2, 00004_Prog3 and
-
00005_Prog4) from this SAXX, then copy them to the USB key of the 2nd SAXX (in the "Recipe"
folder). To copy the SAXX configuration, copy also the "00001_HMI_config" file
- On the 2nd SAXX, import from the USB key to the screen.
It is not possible to copy just one welding program but only the 200 programs at once.
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
English
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 85 -