AXXAIR SAXX-210 Originalbetriebsanleitung Seite 75

INNOVATIVE ORBITAL SOLUTIONS
Manual mode
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
English
Choose the machine and eventually a wire
feeder and AVC-OSC.
Press arrows to move the machine.
If you use a closed head, 3 buttons allow you
an easy positionning for electrode change in
funtion of electrode diameter.
If you use a machine with tachometer and
adjustable resistance, you can launch the
calibration process so as speed will be
automatically corrected. Press start and wait
the end of calibration process.
If a wire feeder has been selected, you can
also move the wire.
If AVC-OSC have been selected, you can
move it and realize the "go to the middle"
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 75 -