AXXAIR SAXX-210 Originalbetriebsanleitung Seite 64

INNOVATIVE ORBITAL SOLUTIONS
Access to electrode,
gas and wire
parameters
Join experience
Direct access to
welding
parameters
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
English
Recap chart
Below you have the program list using these
commons parameters.
Here, one program has been created, its
name is "tube-tube".
Select an empty place to add a new
program.
Pass name: enter the name you want or press
the « choice » button to select a name in the
list.
Choose welding mode :
- Tacking : to do only one welding tack (no
movement)
- Fusion (+ wire): to do an orbital welding
with or without wire feeding
- Slope fusion : As Fusion but there is only
one level and the high current decreases
progressively all along this level.
- Tacking auto: To do automatically 4 or 8
tack welds
- Tacking auto + fusion (+wire) : To do
automatically 4 or 8 tack welds and after
an orbital welding
Choose number of level (number of division of
the 360°)
Direct saving with auto-calculated parameters.
Electrode parameters and arc lentgh.
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 64 -