AXXAIR SAXX-210 Originalbetriebsanleitung Seite 79

INNOVATIVE ORBITAL SOLUTIONS
Dynamic :
Join experience
During welding, press + and – buttons to modify the parameter. On the
adjustment menu, you can choose for each parameter the modification
value.
If the wire speed is displayed and your machine has left and right
buttons, then the left button act as a push on the button - and pressing
the right button act as a press on the + button for the wire speed.
These parameters can not be modified beyond machine limits.
At the end of a dynamic cycle, you can save
modifications either direclty on the program,
or on another program (save as).
Last values of each level and overlap are
stored.
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
English
You can not choose a tacking or tacking auto
program.
Choose the parameters you want to modify
during welding (4 maximum)
If you want, you can also control manually:
- The end of preheating
- Wire start
- Wire stop
If you have choosen to stop manually
preheating, at the end of the pregas, the
STOP button will appear in front of
preheating. By pressing this button, you can
stop when you want the preheating time.
WARNING: preheating does not stop at
the programmed value. It will stop only
by pressing the STOP button.
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 79 -