Declaration Of Conformity; Presentation - AXXAIR SAXX-210 Originalbetriebsanleitung

INNOVATIVE ORBITAL SOLUTIONS

1. Declaration of conformity:

See page 203.

2. Presentation

The SAXX is a direct current (DC) welder generator for the welding of stainless steel and any other
material that can be welded using the TIG process. Using inverter technology, it can be used for TIG welding
with arc-striking by HF. This welder is a TIG orbital welder intended for use in the automatic orbital welding
of tubes for the food-processing, pharmaceutical and chemical industries etc. in particular. Combined with
our welding heads, it offers a compact and powerful range of welding applications, for high quality, repetitive
welding activities.
Electrical supply :
- Single phase main with earth
- Supply voltage : 110 to 230 V +/-15%
- Maximum current on main : 25 A under 230V
and 32 A under 110V
- Frequency : 50/60Hz
- Cable : HO7RN-F 3x2.5 mm² black length 3m
Gas supply :
- Maximum entry pressure: 6 bars
- Maximum Flow : 50l/min per gas line
- Inlet fittings : M12x100 male
- Outlet fittings : Quick release single shut-off female fitting of serie 20
- Allowed gas : Ar, N2, He and H2 (5% max)
Environment :
- Temperature range:
Use from 0 to +40°C
Storage from -20 to +55°C
- Air humidity :
≤ 50% at 40°C
≤ 85% at 20°C
Without condensation
- Altitude: Up to 2000 m above sea level.
- Protection : IP21
Join experience
SAXX-210
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
English
SAXX-300
- Three phase main with earth
- Supply voltage : 400 V +/-15%
- Maximum current on main : 24A
- Frequency : 50/60Hz
- Cable : HO7RN-F 4x2.5 mm² black length 3m
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 52 -