Carrying In The Outdoor Unit; Weight Center Of An Outdoor Unit - Toshiba MMY-MUP0801HT8P-E Installationsanleitung

5

Carrying in the outdoor unit

CAUTION
Handle the outdoor unit carefully, observing the following items.
• When using a forklift truck or other machinery for loading/unloading in transportation, insert the fork of the
forklift truck into the rectangular holes for handling as shown below.
• When lifting up the unit, insert a rope able to bear the unit's weight into the rectangular holes for handling, and
tie the unit from 4 sides.
(Apply padding in positions where the rope comes into contact with the outdoor unit so that no damage is
caused to the outer surface of the outdoor unit.)
(There are reinforcing plates on the side surfaces, so the rope cannot be passed through.)
Rope
Rectangular
holes for
Side
handling
Incorrect
Front/Back
Correct
Fork of the
forklift truck
115-EN
IM_1141001201-2_Book.indd 58 IM_1141001201-2_Book.indd 58
Correct Incorrect Incorrect
Plaster
board
Rectangular
holes for Reinforcing
lifting plate
Weight centre and weight

Weight center of an outdoor unit

A
9 9 0
X
No. Model
MMY-MUP0801
MMY-MUP1001
A
MMY-MUP1201
MMY-MUP1401
MMY-MUP1601
MMY-MUP1801
B MMY-MUP2001
MMY-MUP2201
MMY-MUP2401
– 58 –
B
1 2 9 0
X
X (mm) Y (mm) Z (mm) Mass (kg)
500 400 675 228
312
650 370 605
334
640 360 680 356
EN
116-EN
5/2/2564 BE 16:27 5/2/2564 BE 16:27