Operation - Klarstein DOLCE BACIO Anbauanleitung/Sicherheitshinweise

OPERATION

Ice Cream Making
1. To turn on the power, press the button , the LCD display will show 60:00 , and
the default mode is "Ice cream making", will show up. Press the
back to the standby mode. Connect the power supply and switch on the device.
2. Press the button to select the mode of "Ice cream " "Cooling only " "Mixing
only". If one of the modes is selected , the  will show up. If you have not done
any operation for 15s , the light will disappear . Press the
selection mode while working.
3. Once the "Ice cream "mode was selected , set the time by pressing the button to
increase the time. The time will be increased by 1 minute by pressing each time.
If you press for 2s, the time will be increased quickly until 60 minutes and then will
stay at 60:00. To reduce the time, press the button. The time will be reduced by 1
minute by pressing each time. If you press for 2s, the time will be reduced quickly
until 5 minutes.
4. Press the . button to start making ice cream. The LCD display will keep working
while making ice cream , then the time will start to count down. If you press the
button while making ice cream, the mixing blade will stop, the LCD will show
the stopping time in the meantime. If you press the button again, the machine will
start to work again with the setting mode and remaining time. If you press button,
the mixing motor will stop. The compressor will stop after 3 minutes without any
operation, will go back to power on after 10 minutes, and 3 buzzers will be heard.
If you press the button for 3s ,the machine will stop working and go back to the
selection mode. If there is no operation, the light will turn off after 15s. Press the
and button while working to set the time.
5. Once the ice cream making was finished making is complete or the preparation
time has elapsed, the appliance will turn off after 10 minutes if there is no operation.
After 10 minutes of no operation, the compressor and the fan will turn off.
Keep cool function
To prevent the ice cream from melting after preparation, the cooling function will
automatically activate and keep the ice cream cold for 1 hour. After 1 hour, the device
will switch to Standby mode.
Motor self-protection function
When the ice cream gets harder, the mixing motor might be blocked. Then the motor
protection device makes the mixing motor stop working by detecting its temperature to
ensure the life of the motor.
button to get
button to return to the
EN
23