ASSEMBLY
Step 1
1
2
79
Remove the red stator carefully in order to unfold the treadmill.
1. Place the computer carefully on the frame.
Pay attention that the holes of the computer and the frame are aligned.
2. Connect the computer with the upright post ( 2 + 3 ) with the screws ( 79 ) and the washers ( 73 ).
3. Connect the upright post ( 2 + 3 ) to the pedalstal ( 1 ) with the screws ( 83 ) and the washers ( 73 ).
79# M8*20 2PCS
73# M8 2PCS
79
3
73
79
73
79
73
73# M8 8PCS
79# M8*20 4PCS
76# M8*65 4PCS
79
83
73
73
41