Malfunctions During Operation - Geberit ESG 3 Betriebsanleitung

Malfunctions during operation

If the <General malfunction> LED display
<General malfunction> LED display
light up, the welding procedure has been aborted prematurely
because of a malfunction.
Fault
LED displays for
<General
malfunction>
and <Mains
connection>
light up
B1157-002 © 01-2015
966.475.00.0 (01)
Cause
Mains voltage too
low
Mains voltage too
high
lights up, or if the
plus another LED display
Actions
Switch off any non-
essential consumers
Use a power generator
with the correct output
voltage (see chapter
<Operation with power
generator>)
For normal mains
operation, disconnect the
mains plug and contact
your power supplier
When using a power
generator, ensure the
output voltage is correct
EN
39