Geberit ESG 3 Betriebsanleitung Seite 37

The Geberit electrofusion machine ESG 3 is equipped with
an automatic mechanism which prevents a double weld
when a sleeve connection cable is connected.
1
Connect the electrofusion machine to the supply voltage. The
<Mains connection> LED display
rear cover page).
2
Connect the sleeve connection cable to the electrofusion
coupling or the electrofusion tape for anchor point. The
<Ready for welding> LED display
rear cover page).
3
Press the start button. The <Welding procedure> LED
display
goes out (see figure C, rear cover page).
The welding time is adjusted automatically in accordance
with the ambient temperature.
B1157-002 © 01-2015
966.475.00.0 (01)
lights up and the <Ready for welding> LED display
lights up (see figure A,
lights up (see figure B,
EN
37