Geberit ESG 3 Betriebsanleitung Seite 38

EN
To cancel the welding procedure, press the start button.
The <Welding procedure> LED display
the sleeve connection plugs. The <General malfunction>
LED display
three seconds. The <General malfunction> LED display
goes out.
Repeat the welding procedure with the cooled Geberit
electrofusion coupling or the cooled Geberit electrofusion
tape for anchor point.
4
Welding is completed after approx. 80 seconds. The
<Welding procedure> LED display
<Welding complete> LED display
rear cover page).
Result
Welding has been performed correctly.
38
flashes. Press the start button and hold for
1
goes out. Remove
00:00:03
2
goes out and the
lights up (see figure D,
B1157-002 © 01-2015
966.475.00.0 (01)
3