Application
–
removing material residues, such as tile
adhesive, when replacing damaged tiles
–
milling grout on wall and floor tiles .
Scraper
Materials
mortar/concrete residues, tile/carpet glue, paint/
silicone residues
Application
–
removing material residues, such as carpet glue
residue on the floor .
Sanding plate
Materials
Wood and metal (sanding sheets
wood*, metal*
* Depending on the sanding sheet
Application
–
sanding up to edges and hard-to-reach areas .
PAMFW 20-Li A1
Fitting the sanding sheet onto the
sanding plate
♦
Place the sanding sheet
sanding plate
Changing tools
NOTE
►
■
♦
If necessary, remove an already fitted tool .
To do this, raise the tool release lever
♦
Fit the tool (e .g . the plunge saw blade
the tool holder .
NOTE
►
♦
Lock the tool into place by pushing the tool
release lever
■
Check that the tool is fitted firmly. Incorrectly
or insecurely fitted tools can come loose during
use and cause you an injury .
supplied),
.
If you plan to use the dust extraction unit, it
must be connected before fitting or changing
the tool (see . section "Connecting a dust
extraction unit") .
WARNING! RISK OF INJURY!
Always remove the battery before working on
the power tool .
You can fit the tools in any snap position on
the tool holder .
back down again .
centrally on the
.
) onto
GB │ IE │ NI
│
9
■