Battery Level Display; Operation; Switching On And Off; Setting The Penetration Depth Of The Engraving - Parkside PAGG 4 A1 Originalbetriebsanleitung

Battery level display

The battery level display
coloured LEDs.
Green LED
The battery is charged.
Red LED
The battery is flat. Recharge it.

Operation

Never use the appliance for purposes other than those for which it
was designed and only with original parts/accessories. Using
attachments or accessory tools other than those recommended in the
operating instructions can lead to a risk of injury.
Switching on and off
Switching on
♦ Press and hold the ON/OFF switch
Switching off
♦ Let go of the ON/OFF switch

Setting the penetration depth of the engraving

Use the +/– speed control buttons
of the engraving. A low setting is usually sufficient for the most
common applications.
Press the + speed control button
♦
depth.
Press the – speed control button
♦
depth.
PAGG 4 A1
indicates the charge level using 2
.
.
to set the penetration depth
to increase the penetration
to decrease the penetration
GB │ IE │
39 ■