Technical Data - BWT AQA therm MOVE Power Einbau- Und Bedienungsanleitung

EN
17

Technical data

Designation
Nominal connection width
Pipe water connection
Connection for waste water
Connection for outlet water
Nominal pressure (PN)
Max. operating pressure
Inlet water supply pressure, min. – max.
Water temperature, min./max.
Ambient temperature, min./max.
Outlet water capacity at 15 °C with free discharge, at start of
service life
Outlet water capacity at 15 °C and 2.5 bar counter-pressure, at
start of service life.
Outlet water capacity at 15 °C with free discharge, at end of ser-
vice life, approx.
Outlet water capacity at 15 °C and 2.5 bar counter-pressure, at
end of service life, approx.
Outlet water conversion factor
Salt retention rate, min.
Capacity per membrane cartridge
Protection class
Power supply
Connected load, max.
External fuse
Pump capacity
High-pressure pump motor capacity.
54
Unit/type AQA therm MOVE Power
DN/inch DN20 / 3/4"
DN 20
DN
DN 20
bar PN10
bar
bar 1.5 – 4
°C 5 – 25
°C 5 – 40
l/h Approx. 360
l/h Approx. 320
l/h 300
l/h 250
% < 50
% 95
m³ 40
IP 54
V/Hz 230 / 50
W 450
A, 2 x 2.0
time-de-
lay
m³/h 0.8
W 350
6
9