General Description; Scope Of Delivery; Overview; Function Description - Parkside PHS 450 A1 Bedienungsanleitung/Originalbetriebsanleitung

cidents or damage to other people or their
property. The manufacturer is not liable
for damages caused by unspecified use or
incorrect operation.
Before use, check that the blades
are sharp. Ensure that the blades
are sharpened whenever blunt, in
order to avoid overstressing of the
machine. Damages caused by cut-
ting with blunt blades are not cov-
ered by the guarantee.

General Description

See the front fold-out page for
illustrations.

Scope of delivery

Unpack the device and check it for
completeness. Dispose of the packaging
material correctly.
- Electric hedge trimmer
- Blade protection
- Instruction Manual

Overview

1 Impact protection with drill hole
for hanging up the device
2 Cutter bar
3 Hand protection
4 Front handgrip with safety switch
5 Vents
6 On/off switch
7 Tension relief
8 Grip
9 Mains cable
10 Blade protection
11 Keyhole bore

Function Description

The electric hedge trimmer is driven by an
electronic motor. The equipment is double-
insulated for safety and does not require
earthing.
The hedge trimmer is equipped with a dou-
ble-sided safety cutter bar. When cutting,
the blades move backwards and forwards
in linear motion. The impact protection on
the tip of the cutter bar prevents unpleasant
recoils should the trimmer come into con-
tact with walls, fences and so on.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and briars.
Please note the following descriptions for
the function of the operating components.

Technical Data

Electric Hedge Trimmer ...........PHS 450 A1
Input voltage rating (U) ..230-240 V~, 50 Hz
Input power
(power consumption) (P) ................450 W
Safety class ......................................
Protection category........................... IPX0
Cutting rate ............................3400 min
Weight (incl. accessories) ...approx. 2,3 kg
Cutting length ................ approx. 460 mm
Blade length
(incl. impact protection)... approx. 500 mm
Blade gap ....................... approx. 16 mm
Branch diameter ................. max. 12 mm
Sound pressure level
(L ) .................... 87.7 dB(A), K
pA
Sound power level (L
guaranteed ......................... 103 dB(A)
measured ..... 98.2 dB(A); K
Vibration (a )
h
at the handle .....2.01 m/s
on front
handgrip ...........3,14 m/s
GB IE
=3 dB
pA
)
WA
= 2.03 dB
WA
2 ; K=1.5 m/s
; K=1.5 m/s
2
II
-1
2
2
19