Setup Example - Cameo ROOT PAR 4 Bedienungsanleitung

Setup example:

AUTO / SOUND STAND-ALONE MODE
The 6 available Auto programs each consist of preprogrammed color change sequences; bright-
ness, operating speed, music control with microphone sensitivity, and delay (signal delay) are
configured separately for each program.
Starting from the main display, press MODE to go to the main menu. Using UP and DOWN, now
select the Stand Alone menu option and press ENTER to confirm. Use UP and DOWN again to
select the Auto stand-alone mode and press ENTER to confirm your selection. Now use UP and
DOWN to select the desired program (Program 1 to Program 6) and press ENTER to confirm your
selection.
--------Menu------- ----Stand Alone----
DMX Address Auto
DMX Mode Static
DMX Delay Color Preset
Stand Alone User Color
Slave
Loop
Settings
System Info
This will take you to the submenu for setting the submenu items (see table, select with UP and
DOWN, confirm with ENTER, change value or status with UP and DOWN, confirm with ENTER).
The settings for each programme are made separately and are retained even after restarting the
device.
STANDALONE MODE AUTO/SOUND (PROGRAMME 1 to PROGRAMME 6)
Dimmer Sets brightness
Speed Sets running speed
Sound Activates/deactivates music-control
Sens Sets microphone sensitivity
Delay Delay time for slave groups
----Auto Mode---- -----Program x-----
Program 1 Dimmer
0–100
| Speed
0–100
Program 6 Sound
Off/On
Sens 0–100
Delay 0.0 s–2.0 s
0–100
0–100
Deactivates
Off
music-control
Activates
On
music-control
0–100
0.0 s to
2.0 s
13