Setup Example - Cameo STUDIO PAR TW Bedienungsanleitung

Assign the spotlights to one of up to 24 groups (plus Group 0) according to preference, whereby
several spotlights can be assigned to one group. The group number is also the factor by which the
set delay time set in the DMX controller is multiplied. Confirm each entry by pressing ENTER.
Menu
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
The delay time (delay time of the DMX signal) is set by means of a DMX controller in the separate
DMX delay channel of the corresponding DMX mode (0.0s to 2.0s in 0.1s increments).

Setup example:

Delay Group 0
no Delay
DMX
DMX Delay
Controller
Group 0
DMX Delay 0.5s
STATIC STANDALONE MODE
The Static standalone mode allows the Dimmer, Strobe, CW, WW and Amber values to be set di-
rectly on the device with values in a similar way to with a DMX controller. In this way, an individual
scene can be created without an additional DMX controller.
Starting from the main display, press MENU to enter the main menu. Using and , select the
menu item Stand Alone and confirm with ENTER, then select Static and confirm once again with
ENTER. Using and , now select the menu item that you wish to edit and confirm with ENTER.
Use and to set the desired value. Confirm all entries with ENTER. The strobe effect values
correspond to those in channel 2 of the DMX table D4CH Strobe CCT.
Menu
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
DMX Delay
Group
Delay Group 1 Delay Group 2
0,5s Delay
DMX Delay DMX Delay
Group 1
Stand Alone
Static Dimmer
Strobe
CCT Preset
Playback Loop WW
Edit User Color CW
Edit Loop Amber
Group
00 - 24
Delay Group 3
1s Delay 1,5s Delay
DMX Delay
Group 2 Group 3
DMX Delay
Group 3
DMX Delay
Group 3
Static
000 - 100
000 - 255
000 - 100
000 - 100
000 - 100
Delay Group 4 Delay Group 5
2s Delay 2,5s Delay
DMX Delay
DMX Delay
Group 4 Group 5
15