Setup Example - Cameo STUDIO PAR 4 G2 Bedienungsanleitung

DMX DELAY
The DMX Delay function is a simple way to create a running light effect with a large number of
spotlights that are all the same model and that are all running the same software version. This
is otherwise only achievable with a suitable DMX controller and time-consuming programming.
All the spotlights used (same models, same software version) are set to the same DMX operating
mode with DMX delay channel and controlled via the same DMX start address.
Setting the DMX delay:
Starting from the main display, press MENU to enter the main menu. Now use
the menu item DMX Delay and confirm 2x with ENTER.
Assign the spotlights to one of up to 24 groups (plus Group 0) according to preference, whereby
several spotlights can be assigned to one group. The group number is also the factor by which the
set delay time set in the DMX controller is multiplied. Confirm each entry by pressing ENTER.
Menu
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
The delay time (delay time of the DMX signal) is set by means of a DMX controller in the separate
DMX delay channel of the corresponding DMX mode (0.0s to 2.0s in 0.1s increments).

Setup example:

Delay Group 0
no Delay
DMX
DMX Delay
Controller
Group 0
DMX Delay 0.5s
16
DMX Delay Group
Group 00 - 24
Delay Group 1 Delay Group 2
0,5s Delay
DMX Delay DMX Delay
Group 1 Group 2
Delay Group 3
1s Delay 1,5s Delay
DMX Delay
Group 3
DMX Delay
Group 3
DMX Delay
Group 3
or to select
Delay Group 4 Delay Group 5
2s Delay 2,5s Delay
DMX Delay DMX Delay
Group 4 Group 5