Cameo ROOT PAR 4 Bedienungsanleitung Seite 14

STANDALONE MODE STATIC
The standalone mode static allows the dimmer, strobe, R, G, B and W values and the R, G, B, W,
A and UV values to be set directly on the device, with values between 000 and 255, in a similar
way to with a DMX controller. In this way, an individual scene can be created without an additional
DMX controller.
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to
select the menu item Stand Alone and confirm with ENTER. Again use UP and DOWN to select
standalone mode Static and confirm with ENTER. Using UP and DOWN, now select the menu item
that you wish to edit and confirm with ENTER. You can use UP and DOWN to configure the desired
value between 000 and 255. Confirm all entries with ENTER.
--------Menu------- ----Standalone----
DMX Address Auto
DMX Mode Static
DMX Delay Color Preset
Standalone User Color
Slave
Loop
Settings
System Info
STANDALONE MODE COLOR PRESET
15 different color presets, plus Jump and Fade, are available as preset programmes. The bright-
ness can be separately set for each preset and the running speed for Jump and Fade.
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to
select the menu item Stand Alone and confirm with ENTER. Again use UP and DOWN to select
standalone mode Color Preset and confirm with ENTER. Now use UP and DOWN to select the
desired color preset and confirm with ENTER (Off = blackout, Speed refers to Jump and Fade).
You can now use UP and DOWN to set the desired brightness between 000 and 100. Confirm with
ENTER.
--------Menu-------
----Stand Alone----
DMX Address Auto
DMX Mode
Static
DMX Delay
Color Preset
Stand Alone User Color
Slave Loop
Settings
System Info
STANDALONE MODE USER COLOR
The standalone mode User Color allows you to store four individual color presets of overall
brightness, strobe and a color blend of R, G, B and W or R, G, B, W, A and UV directly in the
device.
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to
select the menu item Stand Alone and confirm with ENTER. Again use UP and DOWN to select
the standalone mode User Color and confirm with ENTER. Using UP and DOWN, now select
the desired preset (color 1 to 4) and confirm with ENTER. Using UP and DOWN, now select
the menu item that you wish to edit and confirm with ENTER. You can use UP and DOWN to
14
CLROOTPAR4 CLROOTPAR6
----Static Mode---- -----Static Mode-----
Dimmer 0–255 Dimmer 0–255
Strobe 0–255 Strobe 0–255
Red 0–255 Red 0–255
Green 0–255 Green 0–255
Blue 0–255 Blue 0–255
White 0–255 White 0–255
Amber 0–255
UV 0–255
----Color Preset----
Off 0 - 100
Cyan
Red 0 - 100 0 - 100
Blue
Amber 0 - 100 Lavender 0 - 100
Yel Warm
0 - 100 Mauve 0 - 100
Yellow
0 - 100 Magenta 0 - 100
Green
0 - 100 Pink 0 - 100
Turquoise
0 - 100 Warm White 0 - 100
ROOTPAR4 ROOTPAR6
White 0 - 100 White 0 - 100
Cold White 0 - 100 Cold White 0 - 100
Jump
0 - 100 UV 0 - 100
Fade
0 - 100 Jump 0 - 100
Speed
0 - 100 Fade 0 - 100
Speed 0 - 100