Installation And Mounting - Cameo ROOT PAR 4 Bedienungsanleitung

(Brightness)
Sets the overall brightness in six levels. The different brightness levels can be accessed by re-
peatedly pressing this button (level 1 = blackout).
FL (Flash/Stroboscope)
Six-level speed setting for the strobe effect. Level 1 deactivates the strobe effect, level 2 produces
a slow flash frequency, followed by levels 3 to 5. Level 6 produces the fastest flash frequency. The
strobe effect can only be used in the color blending mode (RGBW(A+UV).
R/G/B/W (A and UV only in model CLROOTPAR6, CW and WW without function)
Individual color blends can be created with these 4 (6) buttons. The six brightness levels can be
accessed by repeatedly pressing the respective color button, whereby the LEDs are switched
off at Level 1. Example: Set red and green at the maximum level and the remaining LEDs at the
lowest level (i.e. off), and you will achieve a bright yellow color blend.
Ju (color change)
Color changes jump (color jumping). The speed at which the colors change is set with the SP
(Speed) button.
Fa (Color Fade)
Colors fade into each other (color fading). The speed at which the colors change is set with the SP
(Speed) button.
Au (Auto Mode)
Select the desired color change programme Auto 1–6 by repeatedly pressing the Au button.
Su (Music-controlled color change programme)
Select one of six music-controlled programmes Sound 1–6 by repeatedly pressing the Su button.
The microphone used for this is found on the back of the spotlight.
CM (Color Macros)
Fifteen color presets (sixteen on the ROOTPAR6) can be accessed in succession with the buttons
CM+ and CM-.
Pr+/Pr-
Select the programme in Auto Mode (Au) and for Music-control (Su).
INSTALLATION AND MOUNTNG
Thanks to its convenient double bracket, the lamp can be positioned in a suitable location on a
level surface. Installation on a traverse is possible with a traverse clamp, which is attached to the
mounting bracket (A). Suitable traverse clamps are optionally available. Ensure firm connections
and secure the spotlight by attaching a suitable safety cable to the securing lug on the back of the
spotlight.
20