Kärcher MC 130 Plus Bedienungsanleitung Seite 89

Waste container
1
Retaining pins
2
Locking pin
3
Frame
4
Hydraulic connection
5
10.Push the retaining pin the of waste container in and secure
with the locking pin.
11.Connect electrical and hydraulic connections.
Water connections
1
12.Turn the steering wheel all the way to the right to provide bet-
ter access to the connections on the articulated joint.
13.Connect the water recycling hose.
14.Connect the fresh water hose.
15.Connect the high-pressure cleaner hose (optional).
Suction hose
1
Waste container
2
16.Install the suction hose between the waste container and suc-
tion mouth.
Removing the waste container
DANGER
Risk of crushing when lowering/raising the waste container
Maintain sufficient clearance to the waste container and the roll-
ers on the parking supports.
Maintain sufficient clearance to hazard zone and stop raising/
lowering immediately when a person enters the hazard zone.
ATTENTION
Risk of injury and damage
Empty the waste container and water reservoir before removing
Set the waste container down only on a level and smooth surface.
Suction hose
1
Waste container
2
1. Turn the steering wheel all the way to the right to provide better
access to the articulated joint.
English 89