Parking The Vehicle; Sweeping Mode - Kärcher MC 130 Plus Bedienungsanleitung

CAUTION
Risk of accident
When driving on public roads for transport purposes (and not
when cleaning of public roads), switch off the PTO and close the
lowering choke for the front power lift.
1. Switch off PTO.
2. Carefully depress the accelerator pedal.
3. Control the travel direction using the steering wheel.
1. Release the accelerator pedal.
The vehicle brakes automatically and comes to a standstill.
2. For a stronger braking effect or in case of an emergency, ac-
tuate the brake pedal.
Tempomat
The Tempomat is only active in Working mode.
Activating Tempomat
1 Select the desired working speed using the accelerator.
2 Press function key F 8.
Tempomat is activated.
Deactivating Tempomat
1 Press the brake pedal or function key F 8.
Function key F 9 (Resume Tempomat) activates the previously
set speed.

Parking the vehicle

1. Stop the vehicle.
2. Bring the travel direction lever into the neutral position (middle
position).
Note
In this position, the parking brake is automatically actuated; the
vehicle does not move.
3. Lowe the front power lift.
If a sweeper is used:
4. Raise the side brushes.
5. Switching off the "eco" function
or
 Switch off the water pump.
 Wait 20 seconds.
 Switch off the suction fan.
 Raise the suction mouth.
 Switch off the PTO.
All sweeping functions are deactivated.
6. Allow the engine to run in idle mode for 1 to 2 minutes.
7. Switch off the ignition and remove the ignition key.
8. Wait for 30 seconds to allow the engine control unit storage
process to complete.
9. Turn the main switch to position 0.

Sweeping mode

Brush contact pressure pedal
Brush contact pressure pedal
1
Press the pedal briefly: Full brush contact pressure and in-
creased brush speed for heavy soiling.
Stopping
Hold the pedal pressed: Suction mouth remains lowered when
reversing, vacuumed substances are also taken up when revers-
ing.
Setting the sweeping parameters
(A) Button for setting the side brush speed
For individual extraction (option), left side brush speed but-
ton
(B) Button for setting the side brush speed
For individual extraction (option), right side brush speed but-
ton
(C) Button for setting the engine speed
Note
The suction power depends on the set engine speed.
● 1600 rpm Light waste
● 2200 rpm Normal soiling
● 2500 rpm Strong, heavy soiling
(D) Left and ride brush contact pressure button
For individual extraction (option), right side brush contact
pressure button
(E) Left and ride brush contact pressure button
For individual extraction (option), left side brush contact
pressure button
(F) Press the Save button to save set values or programs
(G) Rotary knob for changing values and selecting programs
1. Switch on the PTO.
2. Press the Side brush speed button.
The settings appear on the display.
3. Use the rotary knob to select the desired side brush speed.
4. Press the Save button.
The side brush speed has now been saved.
5. Press the Engine speed button.
The settings appear on the display.
6. Use the rotary knob to select the desired engine speed.
7. Press the Save button.
The engine speed has now been saved.
8. Press the Side brush contact pressure button.
The settings appear on the display.
9. Use the rotary knob to select the desired contact pressure.
10.Press the Save button.
The contact pressure is saved.
English 81