Gram KF 355 Bedienungsanweisung Seite 53

GB
+2 I
Display of temperature setting: Press
TEMP and hold it down. After a moment or
two the display shows the temperature set-
ting, in this case the factory setting of +5°C.
+2 I
When all lamps in the scale light up, the
temperature in the cabinet is + 9°C or high-
er than can be shown on the scale.
+2 I
When the lamp under +2 lights up - and
only this lamp - the cabinet temperature is
lower than can be shown on the scale.
+2 I
+2 I
When the two lamps at either end of the
scale flash alternately and the four middle
lamps light up there is a fault in the tempe-
rature sensor. Call a service technician. (In
the event of sensor fault an emergency
program will take over control until the ser-
vice technician arrives).
+2 I
Alarm: The lamps light up one after the
other along the scale, starting at the cold-
est end. An acoustic alarm is given at the
same time.
All manuals and user guides at all-guides.com
+9 TEMP.
List of signals
-21
Normal condition. The panel shows the
actual freezer temperature, here -18°C.
-21
+9 TEMP.
Temperature setting: Press TEMP and
hold it down. In a moment or two the dis-
play will show the temperature setting, in
this case the factory setting of -18°C.
-21
+9 TEMP.
When all lamps in the scale light up, the
temperature in the freezer is -14°C or hig-
her than can be shown on the scale.
-21
+9 TEMP. When the lamp under -21 lights up - and
only this lamp - the freezer temperature is
lower than can be shown on the scale.
+9 TEMP.
When the two lamps at either end of the
scale flash alternately and the four middle
lamps light up there is a fault in the tempe-
rature sensor. Call a service technician. (In
the event of sensor fault an emergency
program will take over control until the ser-
+9 TEMP.
vice technician arrives).
-21
Alarm: The lamps light up one after the
other along the scale, starting at the col-
I -14 TEMP.
I -14 TEMP.
I -14 TEMP.
I -14 TEMP.
-21 I -14 TEMP.
-21 I -14 TEMP.
I -14 TEMP.
FREEZE
FREEZE
FREEZE
FREEZE
FREEZE
FREEZE
FREEZE
53