Basic Operations; Turning On The Power; To Drop The Volume In A Moment - JVC kd-dv5000 Bedienungsanleitung

BASIC OPERATIONS

2

Turning on the power

1
Turn on the power.
ATT
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
Each time you press the button,
SRC
the source changes as follows.
TUNER
CD-CH or LINE IN
(CD changer)
* 1
Without connecting the DAB tuner or CD
changer, you cannot select it as the source to
play.
2
* If a disc is not in the loading slot, you cannot
select "DISC" as the source to play.
3
* To select "LINE IN, " select "Line In" for the
"Ext Input" setting on page 60.
8
SRC
ATT
1
SEL
1, 3
2
1 *
*
DAB DISC
1 3
* *
2 3 4 5 6
3
Adjust the volume.
ATT
Current sound (iEQ) mode (see page 55)
4
Adjust the sound as you want. (See
pages 54 – 56.)
Note:
While playing a source, you can also show the level
meter on the display. For details, see "Activating the
level meter" on page 10.

To drop the volume in a moment

Press
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press
• If you turn off the power while listening to a
disc, playback will start from where playback
has been stopped previously, next time you
turn on the power.
MODE
DISP
M
D T/P
Volume level appears.
briefly while listening to any
for more than 1 second.