JVC kd-dv5000 Bedienungsanleitung Seite 19

Using PTY Standby Reception
PTY Standby Reception allows the unit to switch
temporarily to your favorite programme (PTY:
Programme Type) from any source except AM
stations.
To select your favorite PTY code for PTY
Standby Reception
When shipped from factory, PTY Standby
Reception has been set to work for searching for
"News" programmes.
You can select your favorite programme type for
PTY Standby Reception.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 58 and 59.)
SEL
2
Press number button 4 to select
"TUNER"—Tuner category of the
PSM settings.
1 2 3
The "PTY Stnby" (standby) setting screen
appears on the display.
3
Select one of the twenty-nine PTY
codes. (See page 23.)
ATT
4 5 6
Selected code name
appears on the display
and is stored into
memory.
4
Finish the setting.
SEL
To set PTY Standby Reception
1
Press MODE (M) while listening to an FM
stereo broadcast.
MODE
"Mode" appears on the display.
M
2
Press number button 3 to activate PTY
Standby Reception while "Mode" is still on the
display.
Each time you press the button, PTY Standby
Reception turns on and off alternately.
1 2 3
Ex.: When the currently selected PTY code for
PTY Standby Reception is "News"
After about
5 seconds
The display returns to the source indication
screen.
PTY indicator (either lights up or flashes)
CONTINUED ON THE NEXT PAGE
4 5 6
19