JVC kd-dv5000 Bedienungsanleitung Seite 63

Creating your own color—User
You can create your own colors—"Day" and
"Night," and select them as the display color for
any desired source.
• Day: Can be used as your user color during
the day time (while the headlights are
turned off), or as set by the timer—
"From – To."
• Night: Can be used as your user color during
the night time (while the headlights are
turned on), or as set by the timer—
"From – To."
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: See pages 58 and 59.)
SEL
2
Press number button 6 to select
"COLOR"—Color category of the
PSM settings.
1 2
The source/color selecting screen appears
on the display.
3
Select "User" as a color.
ATT
To select which source to apply your user
color to, select the target source first by
pressing 5 (up) or ∞ (down), before
selecting "User" in this step.
3 4 5 6
The user color will be
applied to the currently
selected source (the one
shown on the upper
portion of the display. In
this example "All SRC").
4
Select the user color adjustment
screen.
5
Select either "Day" or "Night" to
make an adjustment for.
ATT
6
Adjust the selected user color.
1) Press ¢
one of three primary colors—"R"
(red), "G" (green), and "B" (blue).
2) Press 5 (up) or ∞ (down) to
adjust the selected primary
color.
You can adjust within the range of 00 to
11.
3) Repeat steps 1) and 2) to adjust
the other primary colors.
7
Repeat steps 5 and 6 to adjust the
other user colors—"Day" or "Night."
8
Finish the setting.
SEL
One of the user color
adjustment screens
appears.
"User Day" or "User
Night" is shown on the
left side of the display.
4 to select
or
63