JVC kd-dv5000 Bedienungsanleitung Seite 18

1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 58 and 59.)
SEL
2
Press number button 4 to select
"TUNER"—Tuner category of the
PSM settings.
1 2
The "PTY Stnby" (standby) setting screen
appears on the display.
3
Select "AF-Regn'l" (alternative
frequency/regionalization
reception).
4
Select the desired mode—"AF,"
"AF Reg," or "Off."
ATT
5
Finish the setting.
SEL
18
3 4 5 6
Using TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
the current source (another FM station, CD, or
other connected components).
• TA Standby Reception will not work if you are
listening to an AM station.
Press T/P to activate TA Standby
T/P
Reception.
Each time your press the button,
this function is turned on and off
alternately.
TP indicator (either lights up or flashes)
7 When the current source is FM, the TP
indicator either lights up or flashes.
• If the TP indicator lights up, TA Standby
Reception is activated.
If a station starts broadcasting a traffic
announcement, "Traffic Flash" appears on
the display, and this unit automatically tunes
in to the station. The volume changes to the
preset TA volume level (see page 22) and
the traffic announcement can be heard.
• If the TP indicator flashes, TA Standby
Reception is not yet activated since the
station being received does not provide the
signals used for TA Standby Reception.
To activate TA Standby Reception, you need
to tune in to another station providing these
signals. Press ¢
for such a station.
When a station providing these signals is
tuned in, the TP indicator stops flashing and
remains lit. Now TA Standby Reception is
activated.
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, "Traffic Flash" appears on the
display, and this unit automatically changes the
source and tunes in to the station.
4 to search
or