Changing The Display Color - JVC kd-dv5000 Bedienungsanleitung

Changing the display color

You can set the display color using the PSM
control. You can select your favorite color for
each source (or for all sources).
You can also create your own colors, and set
them as the display color.
Setting the desired color for each
source
Once you have set the color for each source (or
for all sources), the display illuminates in the
selected color when the source is selected.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: See pages 58 and 59.)
SEL
2
Press number button 6 to select
"COLOR"—Color category of the
PSM settings.
1 2
The "All SRC" setting screen appears on the
display.
3
Select the source—All SRC, CD,
Changer (Line), FM, or AM—that you
want to set the display color for.
All SRC
AM
62
3 4 5
*1
CD
Changer *2
FM
(Line)
* 1
When you select "All SRC," the same color
will be used for all sources.
* 2
Either component which is selected in the
"Ext Input" setting appears.
4
Select the display color.
ATT
O Aqua O Sky O Sea O
Every
1
*
Leaves O Grass O Red O Rose O
Amber O Honey O Violet O Cotton O
Snow O User
beginning)
* 1
When you select "Every," the color changes
every 2 seconds (changing to every color
listed above except "User").
* 2
When you select "User," the user-edited
colors—"Day" and "Night" will be applied.
(See page 63.)
5
Repeat steps 3 and 4 to select the
color for each source (except when
selecting "All SRC" in step 3 ).
• If you want to apply different colors to the
different sources, select any source other
than "All SRC" before finish the setting.
6
Finish the setting.
6
SEL
As you turn the control
dial, the colors change
as follows:
O (back to the
2
*