Replacing Air Filter; Changing Air-Oil Separator - Comprag DV Serie Bedienungsanleitung

5.4

Replacing air filter

5.5 Changing air-oil separator

1
Fig. 5.5.1 Changing air-oil
DV11 – DV15
separator
Open the right side panel, remove the separator (1) using a special oil filter wrench. Oil the
gasket of the new air-oil separator and screw it into place. Only tighten the air-oil separator
by hand.
28
The air filter (1) is attached to the compres-
sor's intake valve. In order to replace it,
open the front side panel, loosen the clamp
1
(2) securing the filter. Remove the contam-
inated filter, and detach the clamp from it.
2
Set the new filter in its place and fit into
place with the clamp.
Fig. 5.4 Air filter replacing
1
Fig. 5.5.2 Changing air-oil
separator
DV18 – DV22
Version 1.0