Safety Precautions During Operation - Comprag DV Serie Bedienungsanleitung

11. There must be an information plate affixed next to the control panel on equipment with
an independent control system featuring an automatic restart function: 'ATTENTION: This ma-
chine may start operating without warning!'
12. Any tanks and vessels working under pressure must be fitted with safety-relief valves! Unautho-
rised installation, disassembly or adjustment of attached safety-relief valves is not allowed.
1.4

Safety precautions during operation.

1. Ensure that hoses correspond to the equipment in terms of nominal diameter and working
pressure. Check the attachment of every hose coupling before start-up. An insecurely fastened
hose may cause serious injury.
2. Never turn on equipment if you suspect the presence of highly flammable impurities in the air!
3. The operator remotely controlling equipment must ensure that no installation or other work is
being performed with the equipment at that moment! An information plate must be affixed to the
equipment in relation to this: 'ATTENTION: this machine is being controlled remotely and may start
operating without warning!'
4. An operator is not allowed to operate equipment if the operator is fatigued, in a state of
intoxication from alcohol, drugs or medicine that reduces the body's reaction time.
5. The equipment must not be operated if parts of the casing have been removed. Doors or
panels may be opened for short durations for inspection and scheduled checks. It is advisable
to wear hearing protection.
6. Personnel in conditions or a facility where the sound pressure level reaches or exceeds 90 dB (A),
must wear ear protectors.
7. If the air used for cooling equipment is used while the facility is being heated, undertake
measures for it to be filtered so that it is suitable for breathing.
8. Regularly check that:
• safety devices and attachments are in place;
• all hoses and pipes are in good condition and sealed;
• there are no leaks;
• brackets and structural components are tightened;
• all electrical cables and contacts are in good condition and safe to use;
• safety devices are fully functional and there is no contamination etc;
• all structural components are in working order, with no signs of wear and tear.
6
The user is solely liable for injuries or damages which occur due to
non-compliance with safety guidelines during installation, opera-
tion or servicing, as well as unauthorised use of equipment!
In some types of equipment, open doors or removal of panels
during operation may lead to overheating.
Version 1.0