Omron VARISPEED V7 IP65 Schnellstartanleitung Seite 37

4. Operator Use
Appearance
R U N
STOP
RESET
EN-8
Name
Data display
FREF Indicator
FOUT Indicator
IOUT indicator
MNTR indicator
F/R indicator
LO/RE indicator
PRGM indicator
Mode Key
Increment Key
Decrement Key
Enter Key
RUN Key
STOP/RESET
Key
http://www.kontrolkalemi.com/forum/
Data display
Monitor item
indicators
Operation keys
Function
Displays relevant data, items, such as frequency reference, output
frequency and parameter set values.
The frequency reference can be monitored or set while this
indicator is lit.
The output frequency of the inverter can be monitored while this
indicator is lit.
The output current of the inverter can be monitored while this
indicator is lit.
The values set in U-01 through U-19 are monitored while this
indicator is lit.
The direction of rotation can be selected while this indicator is lit
when operating the inverter with the run key.
The operating of the inverter through the Digital Operator or
according to the set parameters is selected while this indicator is lit.
Note: The status of this indicator can be only monitored while the
inverter is in operation. Any RUN command input is ignored while
this indicator is lit.
The parameter in n01 through to n179 can be set or monitored
while this indicator is lit.
Note: while the inverter is in operation, the parameters can be only
monitored and only some parameters can be changed. Any RUN
command input is ignored while this indicator is lit.
Switches the setting and monitor item indicator in sequence.
Parameter being set will be cancelled if this key is pressed before
entering the setting.
Increases multi-function monitor numbers, parameter numbers and
parameters set values.
Decreases multi-function monitor numbers, parameter numbers
and parameters set values.
Enters multi-function monitor numbers, parameter numbers and
internal data values after they are set or changed.
Starts the inverter running when it is in operation with the Digital
Operator.
Stops the inverter unless parameter n07 is not set to disable the
STOP Key.
DIGITAL
OPERATOR
JVOP-147