Orbea BLUE PAPER RISE Technisches Handbuch Seite 13

24 | ORBEA
The torque levels of each assist mode can be customized
using the Shimano Etube Project smartphone app to
adjust Rise to your needs.
The Shimano EP8 RS motor allows you to choose between
Read the Shimano Etube Project app section of this
manual to learn about how to change between the assist
Read the complete Shimano Etube Project app manual on
the link below:
https://si.shimano.com/#/en/iUM/7J4MA/
customization/TOC_CUSTOMIZATION
SYSTEM ERRORS
When an error is detected in the system, both LED on
the EW-EN100 junction will blink inred. In assemblies
with the SC-EM800 display, the error code will be shown
on the screen.
W101
!
WALK
TECHNICAL MANUAL
Turn the bicycle Off and On again and connect it to
the Shimano Etube Project app. The error code and the
troubleshooting procedure will be shown on the section
Maintenance>Error Log. You can also consult the EP8
system manual for the error codes and their solutions.
BLUE PAPER RISE · 2021
07 ORBEA RS TOOLBOX
RISE DATA DISPLAY ON COMPATIBLE
GARMIN UNITS
INSTALL AND UNLOCK ORBEA RS
TOOLBOX ON GARMIN DEVICES.
GARMIN CONNECT APP
Orbea RS Toolbox is an app for Garmin compatible de-
vices exclusive for Rise owners. It is added to your Garmin
information of your Rise while riding.
The following method describes how to
install and unlock Orbea RS Toolbox on
your Garmin device using the smartphone
app Garmin Connect through a Bluetooth
connection. You use the same procedure on
your PC or Mac using Garmin Express, con-
necting your device to your computer using
an USB cable.
To unlock Orbea RS Toolbox on your Garmin
device, you must have registered your new
Rise's barcode on Orbea's website, which
also lets you enjoy the Lifetime Warranty on
your new frame. Go to Orbea's website and
register your bike's barcode, creating an ac-
www.orbea.com/es-es/access-register
the bicycle's frame:
ORBEA | 25
1. Open the Garmin Connect app on your smartphone and
connect your device via Bluetooth.
You can download and install Garmin Connect for Google
Play or Apple Store.
2. Select "Activities and App Management".
3. Select "Data Fields".
EN