Orbea BLUE PAPER RISE Technisches Handbuch Seite 29

56 | ORBEA
SHIMANO EP8 COMPONENTS CABLE
ROU TI N G AN D CON N E CTI O N
SHIMANO EW-EN100 JUNCTION
ASSEMBLIES (WITHOUT DISPLAY)
SW-EM7000 L
EW-EN100
EW-AD305
To junction EW-EN100 /
A centralita EW-EN100 /
SC-EN800 display display SC-EN800
Speed
Sensor
sensor
de velocidad
2 5
SPEED SENSOR DISC MAGNET 6 BOLT
ART Nº: X2400000
SPEED SENSOR DISC MAGNET 6 BOLT
TECHNICAL MANUAL
25
EW-SS301
0.6 N.m
The installation and replacement of the electric
QTY.
system components requires an advanced techni-
1
cal knowledge and may therefore be beyond the
skills of most users. Always take your bicycle to
an authorized dealer for the diagnosis, repair and
installation of the electric system components.
Damage to the components derived from inco-
rrect installation may void the warranty on such
components.
BLUE PAPER RISE · 2021
DIFFERENCES BETWEEN ASSEMBLIES
WITH SHIMANO EW-EN100 JUNCTION
(WITHOUT DISPLAY) AND WITH
SHIMANO SC-EM800 DISPLAY (OPTION)
The assemblies with the Shimano EW-EN100 use STEPS/
Di2 standard EW-SD50 cables to connect the handlebar
remote lever to the junction.
A standard SD50 cable connects the EN100 junction to an
EW-AD305 adapter inside the frame, which converts the
SD50 cable to a thinner SW-SD300 cable for its connec-
tion to the EP8 RS motor.
The EW-SD300 cables are the Shimano standard for the
EP8 systems.
T10
Shimano EW-SD300 cable
Shimano EP8 motor
Shimano
EW-SD50 cable
Shimano EP8 motor
Assemblies wth the SC-EM800 display use the thinner
SW-EM800
EW-SD300 to connect the handlebar remote ever to the
display and the display to the EP8 motor, not being neces-
sary the EW-AD305 adapter inside the frame.
SC-EM800
ORBEA | 57
EN
SW-EM7000 L
EW-EN100
EW-AD305
Shimano
EW-SD300 cable