Malfunctions And Solutions - C.M.A. Astoria Plus 4 You TS SAEP Bedienungs-Und Wartungsanleitung, Anweisungen Für Den Benutzer

Malfunctions and solutions

8.6
Problem
NO MACHINE POWER
NO WATER IN THE HEATING UNIT
TOO MUCH WATER IN THE HEATING
UNIT
STEAM IS NOT COMING OUT OF THE
STEAM NOZZLES
WATER OR STEAM MIXED WITH WATER
COMES OUT OF THE STEAM NOZZLES
NOTHING IS BEING DISPENSED
WATER LEAKS FROM THE MACHINE
COFFEE IS TOO HOT OR TOO COLD
COFFEE IS BEING DISPENSED TOO
QUICKLY
COFFEE IS BEING DISPENSED TOO
SLOWLY
THE COFFEE GROUNDS ARE WET
THE DISPLAY INDICATES NON-
CONFORMING PRESSURE
GROUNDS FOUND IN CUPS
THE CUP IS DIRTY WITH SPLASHES OF
COFFEE
THE LEDS OF ALL THE PUSH BUTTON
PANELS ARE FLASHING
COFFEE IS BEING DISPENSED
UNEVENLY
THE COFFEE DOSE IS NOT CORRECT
THE DOSE BUTTON LED IS FLASHING
THE ELECTRONIC SYSTEM HAS
SHUTDOWN
WATER IS LEAKING FROM THE PUMP
THE PUMP IS NOISY
70 260
of
Cause
The machine is switched off.
The water mains tap is shut off.
Electrical system or hydraulic system fault.
The nozzle sprayer is clogged.
The machine is switched off.
Electrical system or hydraulic system fault.
The water mains tap is shut off.
The coffee has been ground too finely.
The tray is not draining.
The drain pipe is broken, has detached, or the water
flow is obstructed.
Electrical system or hydraulic system fault.
The coffee has been ground too coarsely.
The coffee has been ground too finely.
The dispensing group is dirty.
The dispensing group is too cold.
The coffee has been ground too finely.
The coffee is too old.
Hydraulic system fault.
The filter holder is dirty.
The filter holes are worn.
The coffee has not been ground evenly.
The coffee has been ground too coarsely.
The filter's edge is damaged.
After a few minutes the water stops being automatically
filled.
The timeout device has cut in.
There is no water in the mains.
The coffee has been ground too finely.
Electrical system or hydraulic system fault.
Pump fault.
Pump fault.
Action
Turn on the machine.
Open the water mains tap.
Turn off the machine and call out the Technical
Support.
Clean the steam nozzle sprayer.
Turn on the machine.
Turn off the machine and call out the Technical
Support.
Open the water mains tap.
Adjust the coffee grinder.
Check the sewer drain.
Check and restore the drain pipe connection to
the tray.
Turn off the machine and call out the Technical
Support.
Adjust the coffee grinder.
Adjust the coffee grinder.
Wash the group with the blind filter.
Wait for the group to fully heat up.
Adjust the coffee grinder.
Replace with fresh coffee.
Turn off the machine and call out the Technical
Support.
Clean the filter holder.
Replace the filter.
Adjust the grinder as appropriate.
Adjust the coffee grinder.
Replace the filter.
Turn the machine off and then back on.
Open the water mains tap.
Adjust the coffee grinder.
Turn off the machine and call out the Technical
Support.
Turn off the machine and call out the Technical
Support.
Turn off the machine and call out the Technical
Support.
USER manual