C.M.A. Astoria Plus 4 You TS SAEP Bedienungs-Und Wartungsanleitung, Anweisungen Für Den Benutzer Seite 50

PERMITTED USES
All uses compatible with the technical
features, operations and applications
described in this document which do not
endanger the safety of the User or cause
damage to the machine or the surround-
ing environment.
All uses not specifically mentioned in this Manual
are prohibited and must be expressly authorised
by the Manufacturer.
INTENDED USES
The machine has been designed exclu-
sively for professional use.
The use of products/ materials other
than those specified by the Manufacturer,
which can cause damage to the machine
and be dangerous for the operator and/or
those in close proximity to the Machine,
is considered incorrect or improper.
CONTRAINDICATIONS OF USE
The machine must not be used:
For uses other than those listed in para.
3.4, or for uses that differ or are not
mentioned in this Manual;
With materials other than those listed
in this Manual;
With safety devices that have been
disabled or are not working.
INCORRECT USE OF THE MACHINE
The type of application and per-
formance that this machine has been
designed for, imposes a number of op-
erations and procedures that cannot be
changed, unless previously agreed with
the Manufacturer. All allowed practices
50 260
of
are contained in this document, any op-
eration not listed and described in this
document is to be considered not possi-
ble and therefore dangerous.
IMPROPER USE
The only permitted uses are described
in the Manual, any other use is to be
considered not possible and therefore
dangerous.
GENERAL SAFETY FEATURES
The user must be aware of the risk of
accidents, the devices designed for safety,
and the general rules on safety provided
by EU directives and by the legislation of
the country where the line is installed.
The user must know how all the ma-
chine's devices work.
They must also have fully read this
manual.
The maintenance work must be per-
formed by qualified technicians after the
machine has been specially prepared.
The tampering or unauthorised re-
placement of one or more machine com-
ponents, the use of accessories which
modify its use and the use of materials
other than those recommended in this
Manual, can cause accidents.
USER manual