Dispensing Hot Water - C.M.A. Astoria Plus 4 You TS SAEP Bedienungs-Und Wartungsanleitung, Anweisungen Für Den Benutzer

Dispensing hot water

7.8
7.8.1 Programming
The machine is programmed
by default. Should the hot water
doses need to be modified, pro-
ceed as follows:
Place the jug under the hot
water spout;
Press and hold down the
button on the left push button
panel for 5 seconds: all of the
dose buttons LEDs will be lit;
Press the hot water dispensing
button ;
Wait for the dispensing process
to finish; to confirm the dose,
press the button again;
When you have finished pro-
gramming, press the
ton.
The tea buttons are on the keypads of each group. These can be
programmed individually and provide doses that are independent
from one another.
The 4GR version has 2 hot water spouts.
The 2 keypads on the left control the left hot water spout, while
the 2 keypads on the right control the right hot water spout.
USER manual
P
rog
S
top
P
rog
S
top
but-
P
rog
S
top
7.8.2 Dispensing hot water
Place the jug under the hot
water spout;
Press the button and wait
for the hot water to be dis-
pensed;
To stop dispensing ahead of
time, press the
again.
Avoid contact with the hot water nozzle, do not place your hands
or other body parts near the hot water nozzle tips.
When the machine is cool (pressure below 0.6 bar), hot water
cannot be dispensed. To change the temperature of the dispensed
water, request for a Qualified Technician to come out.
button
59 260
of