Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning The Steam Nozzle; Spare Parts; Decommissioning; Dismantling - C.M.A. Astoria Plus 4 You TS SAEP Bedienungs-Und Wartungsanleitung, Anweisungen Für Den Benutzer

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 113
8.7.4 Cleaning the shower screen and shower screen
containment ring
Clean the shower screen and shower screen con-
tainment ring on a weekly basis, following the steps
indicated below:
Loosen the screw (1) using a
screwdriver;
Remove the shower screen
(2) and the shower screen
containment ring (3);
Wash the two components
with hot water;
Reposition the shower
screen and shower screen
containment ring in their
original position and lock
everything in place with the screw.

8.7.5 Cleaning the steam nozzle

Clean the steam nozzle on a weekly basis as follows:
Insert the steam wand into a jug with water and a
specific cleaner, in accordance with the manufactur-
er's instructions;
Heat the solution with the steam nozzle;
Let the nozzle cool down whilst
keeping it immersed in the solu-
tion for at least 5 minutes in order
to allow the cleaner to rise inside
the nozzle due to the cooling
effect;
Repeat the operation 2 or 3 times
until no more milk residue is dis-
pensed.
8.7.6 Raised cup grilles
Clean the raised cup grilles on a daily basis as follows:
Remove the grille from its storage position by pulling
it until it detaches completely from the machine;
Clean with a cloth
dampened in luke-
warm water;
Push the grille once
again until it com-
pletely disappears
into its storage position.
USER manual
9.

SPARE PARTS

Machine components and/or parts must only be
replaced by one of the Manufacturer's Qualified Tech-
nicians.
3
Under no circumstances is the User authorised to replace machine
components and/or parts.
2
10.

DECOMMISSIONING

The machine must be decommissioned by one of
1
the Manufacturer's Qualified Technicians because the
appliance must be disconnected from the electricity
and water mains, and all the internal circuits must be
emptied of water.
After being decommissioned, the machine can only
be recommissioned by a Manufacturer Qualified Tech-
nician.
Under no circumstances is the User authorised to decommission
the machine after a long period of time and/or recommission the
machine.
11.

DISMANTLING

We recommend that the machine is dismantled by
one of the Manufacturer's Qualified Technicians.
12.

DISPOSAL

Disposal information

12.1
Only for the European Union and the European Eco-
nomic Area.
This symbol indicates that the product cannot be dis-
posed of with household waste, pursuant to the WEEE Di-
rective (2012/19/EC), the Battery Directive (2006/66/EC)
and/or the national laws implementing those Directives.
The product should be handed over to a designated
collection point, for example the dealer when purchasing
73
260
of

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis