Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
M
9.
ilk selection
Use
1) Insert the two aspiration tubes into the milk container;
2) For cappuccino, coffee and milk or milk with a shot of coffee, fill the filter with
the dose of ground coffee and press it with the coffee press;
3) Attach the filter holder to the dispenser assembly;
4) Place the cup under the filter holder;
5) Select the desired dose, for example cappuccino (LED comes on) and wait for
completion of milk and coffee (the latter only for cappuccino, coffee and milk or
milk with a shot of coffee).
To stop delivery ahead of time, press the selected key again.
i
If the dose consists of coffee and milk, press the selected key repeatedly until the cycle is
completely interrupted.
For manual delivery of warm milk, select the Add Milk key
stop the brewing of milk.
Programming
Program the milk selections push button panel in the following way:
• Turn the programming key to the ON position (
• Hold the PROG key
Programming CAPPUCCINO and COFFEE WITH MILK
• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the
filter holder to the delivery group;
• Select the dose to be programmed (e.g. cappuccino);
• Wait for milk delivery;
• To confirm the dose of milk, press the cappuccino key again.
• Wait for coffee delivery;
• To confirm the dose of coffee, press the cappuccino key again.
Programming FOAMED MILK and WARM MILK
• Select the dose to be programmed (e.g. foamed milk);
• Wait for milk delivery;
• To confirm the dose, press the foamed milk key.
24
Foamed
Cappuccino
Latte
Milk
Foamed
Cappuccino
Latte
Milk
down for at least 5 seconds (all LED on the push button panels come on);
Hot
Latte
Auto
Additional
Cappuccino
Latte
Macchiato
Steamer
Hot Milk
Milk
Hot
Latte
Auto
Milk
Macchiato
Steamer
P
flashes on the display);
Foamed
Hot
Latte
Auto
. Press again the button
Macchiato
Steamer
Milk
Milk
Additional
Hot Milk
Additional
to
Hot Milk
Werbung
Kapitel
Inhaltsverzeichnis
