Clock And Date; Switching On; Switching Off; Rest Day - C.M.A. GLORIA Anwendungen

15.1 Programming of CLOCK and DATE
Change of hour, date and day of :
1) Keep the MODE key
2) use the key
3) Press the ENTER key
4) Press the MODE key
15.2 SWITCHING ON programming
Programming of the automatic switching on of the machine:
1) set the machine switching on time with the keys
2) press the ENTER key
3) press the MODE key
15.3 SWITCHING OFF programming
Programming of the automatic switching off of the machine:
1) set the machine switching off time with the keys
2) press the ENTER key
3) press the MODE key
15.4 REST DAY programming
Programming of rest days (1=Monday; 2=Tuesday; 3=Wednesday; ...) :
1) activate or deactivate "-" (rest) using the ENTER key
2) press the keys
3) press the MODE key
i
Also activate the ON and OFF time.
15.5 WATER SOFTENER REGENERATION programming
Programming of the automatic warning of water softener regeneration:
1) with the key
2) press the MODE key
When the machine reaches 90% of the value set on the display a signal appears for 5 seconds. When the
i
machine reaches 100% of the value set on the display a blinking signal appears.
With the programming key in the ON position and by pressing the 4 keys
seconds, the number of litres of water used is displayed. The regeneration control is excluded by setting a
value equal to 00.
30
pressed for 3 seconds;
to change the parameter during the flashing phase;
to move on to the next parameter;
to move on to the next programming.
to pass from hours to minutes and vice versa;
to pass on to the next programming.
to move from hours to minutes and vice versa;
to move on to the next programming.
to move from a day to the next;
to move on to the next programming.
set the water quantity (increments of 50 l.);
to move on to the next programming.
;
;
;
clock set-up
09:16 18-02-05 1
auto on/off
on 08:50
auto on/off
off 18:30
working days
1 2 - 4 5 6 7
reg. softener
000000
together for 3