Operation Tips; Long Periods Of Inactivity - FIMAR 7/SN Benutz Und Wartungsanleitung

Operation tips

Every litre of the water used for the mix requires about 2Kg. of the flour. The exact quantities will depend on
the type of product to be obtained and the flour being used. The water should always be poured into the pan
before the flour is added.
Capacity production:
Mod.7/SN: Pour 2.5 litres of water into the pan and add 2 Kg. of flour
After 1-2 minutes of kneading, add another 2.5 Kg. of flour.
Mod.12/SN-12/CNS-12/FN: Pour 4 litres of water into the pan and add 4 Kg. of flour
After 1-2 minutes of kneading, add another 4 Kg. of flour.
Mod.18/SN-18/CNS-18/FN: Pour 6 litres of water into the pan and add 6 Kg. of flour
After 1-2 minutes of kneading, add another 6 Kg. of flour.
Mod.20LN: Pour 6 litres of water into the pan and add 6 Kg. of flour
After 1-2 minutes of kneading, add another 4 Kg. of flour.
Mod.25/SN-25/CNS-25/FN 30/LN: Pour 8 litres of water into the pan and add 8 Kg. of flour
After 1-2 minutes of kneading, add another 9 Kg. of flour.
Mod.38/SN-38/CNS-38/FN: Pour 13 litres of water into the pan and add 12 Kg. of flour
After 1-2 minutes of kneading, add another 13 Kg. of flour.
Mod.50/SN-50/CNS-50/FN: Pour 17 litres of water into the pan and add 16 Kg. of flour
After 1-2 minutes of kneading, add another 17 Kg. of flour.
•
At the end of a work day, unplug the machine from the power mains.
•
Thoroughly clean the machine using neutral detergents.
•
Wipe the machine outer parts with a damp sponge.
•
Do not use steel wool or abrasive cleaning products.
Removal of the removable parts.
Lift the head by rotating anti-clockwise the hand lever (mod.CNS-FN).
INFORMATION: Before every operating cycle always check that the removable parts
are well locked to the machine. Lock the pan by rotating anti-clockwise the lower flange.

Long periods of inactivity

If the machine is to be left idle for long periods of time, turn off the main wall switch, thoroughly clean the
machine and cover it with a sheet to protect it from dust.
For removing the pan rotate the lower
flange clockwise and lift the pan upwards
9
(mod.CNS).