Sitzdichtung S Pressed-in seat seal S Flachdichtring S Flat seal S DN 25 – 32 verschraubte Sitzdichtung S Screwed-in seat seal S GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18 awpvalves.com...
Seite 4
Flat seal R Spindel. kpl. Stem complete DN 200 – 500 Verschraubte Sitzdichtung S Flachdichtring S Screwed-in seat seal S Flat seal S GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18 awpvalves.com...
Gemische mit Kältemaschinenöl, neutrale, gasför- and mixtures with refrigerator oil, neutral, gaseous and mige und flüssige Medien Kühlsole auf Glycol-Basis. liquid media; cold brine based on glycol. GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18 awpvalves.com...
Application AWP-Absperrventile sind geeignet für den Einsatz in AWP-Shut off valves are designed for installation in the Kältemittelkreisläufen für Industrie-Kälteanlagen. refrigerant cycles for industrial refrigerating plants. GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18...
DN 250. Kennzeichenschild) sollte eingehalten werden. Eine From DN 300 the flow direction and the following entgegengesetzte Durchflussrichtung ist bis DN 250 differential pressures should be observed: GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18 awpvalves.com...
Seite 8
To disassemble the valve insert sufficient space has to be über dem Ventil freizuhalten. Siehe folgende Tabelle. kept clear over the valve. see following table. 1200 1200 1200 GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18...
Insert a new flat seal SB into the cover. Lubricate the Schraubbuchse mit Kältefett (z. B. RENOLIT screw bushing with low-temperature grease (e. g. UNITEMP 2) einfetten und handfest anziehen. RENOLIT UNITEMP 2) and fasten it finger-tight. GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18 awpvalves.com...
Seite 10
Once done the washer and flat sealing Verfahren (Feilen, Sägen) entfernt werden, so dass ring S can be removed die Scheibe und der Flachdichtring S abgenommen werden können. GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18 awpvalves.com...
Seite 11
ISO 4762 ISO 4017 Anzugdrehmoment für 8.8-Schrauben / tightening torque for 8.8 screws 1450 2000 Anzugdrehmoment für A2-70-Schrauben / tightening torque for A2-70 screws GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18...
Sie bitte auch unsere Allgemeinen our Standard Sales Terms which can be viewed on our Geschäftsbedingungen, einzusehen auf unserer Website website awpvales.com. awpvales.com. GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18...
Caps come Handräder enthalten. Ein O-Ring zur Abdichtung ist im along with an o-ring for sealing. Lieferumfang der Kappen enthalten. GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18 awpvalves.com...
Seite 14
Ersatzteilnummern. In case of doubt please contact our sales support! Bitte wenden Sie sich im Zweifelsfall an unseren Sales Support! GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18 awpvalves.com...
Nichtbeachtung der Einsatzgrenzen und Ignoring the operational limits and manufacturer’s Herstellervorschriften entsprechend dieser provisions provided in these operating instructions Betriebsvorschrift GEA AWP GmbH Armaturenstr. 2 Tel +49 3984 8559-0 info@awpvalves.com 17291 Prenzlau, Germany Fax +49 3984 8559-18 awpvalves.com...