Operation; Turning The Balance On; Turning The Blance Off; Weighing - OHAUS Sapphire JS10 Bedienungsanleitung

Sapphire JS10 and JS500

OPERATION

Turning the Balance ON

Press On. . . . . All segments will appear briefly followed by a software revision
number and then
Low Battery Indicator
Stability Indicator
Turning the Balance OFF
To turn the balance OFF, press and hold Off until the display indicates
release.

Weighing

1. If it is necessary to rezero the display, momentarily press O/T.
2. Place item(s) to be weighed on the pan and read the weight on the
display. The stability indicator

Taring

When weighing items that must be held in a container, taring subtracts the
container's weight from the total weight on the pan.
1. With an empty container on the pan, press O/T to zero the display.
2. As material is added to the container, the net weight is displayed. Tared
weight remains in balance memory until O/T is pressed again.

Parts Counting

Parts counting must be turned ON before using this procedure. Refer to Activating
Units. The balance will count parts based on the weight of a reference sample of
5, 10, 20 or 50 parts. For optimum results, the parts should be uniform in
weight.
2 Text new.pmd
g
. Allow 5 minutes warm-up time.
BAT
Balance Display
appears when the reading is stable.
*
5
Unit Indicators
g
dwt
pct
ozt
6/10/2004, 9:53 AM
EN-5
, then