Selecting The Interface Protocol - Fronius IG 300 Bedienungsanleitung

Selecting the in-
terface protocol
114
Select "DATCOM" in the Setup menu
1
Press the "Enter" key
2
Select the "Protocol type" menu item
3
Press the "Enter" key
4
The first setting for the communication pro-
tocol transmission is displayed - "Fronius
Solar Net".
Use the "Up" and "Down" keys to se-
5
lect the "Interface" communications
protocol
Press the "Enter" key
6
The selected setting for the communication
transmission protocol is applied. The "Pro-
tocol Type" menu item is displayed.