In order to check whether the commu-
7
nication protocol has been transmitted,
select menu item "Status" under menu
item "DATCOM"
Press the "Enter" key
8
The communication status is displayed.
-
"Status": indicates which protocol type
has been set
-
"BaudRate": indicates the baud rate at
which the most recently received data
were transmitted
-
"OkCnt": indicates the quantity of data
received without errors
-
"ErCnt": indicates the quantity of data
received with errors
Press the "Esc" key
9
The "Status" menu item is displayed.
Press the "Esc" key
10
The "DATCOM" menu item is displayed.
121