Command Availability; General Commands - Fronius IG 300 Bedienungsanleitung

Command Availability

General Com- Commands marked with an "X" are available for the relevant system version.
mands
Value
0x01
0x02
0x03
0x04
0x05
0x06
0xBE
0xBF
0x9F
0xBD
*
**
(1)
(2)
148
Command / Query
Get version
(software version and version)
Get device type
(device or option)
Get date time
Get active inverter
(number of active inverters)
Get active sensor cards
(number of active sensor
cards)
Get Fronius Solar Net status
(network status)
Get device version
(hardware and software ver-
sion of the modules)
Get device ID
(device number)
Set power reduction and reac-
tiv power
(effective power reduction and
reactive power specification)
Get inverter capability
(available inverter functions)
only for Fronius IG Plus and Fronius CL
only available from software version 5.3.0 of the inverter. More detailed infor-
mation about the availability of the command can be found in the description of
the command
only available from version number 1.1.1.0 of the inverter control board. Only
the effective power reduction is available. More detailed information about the
availability of the command can be found in the description of the command
only available from version number 1.1.1.0 of the inverter control board. More
detailed information about the availability of the command can be found in the
description of the command
X X X X
X X X X
X - - X
X X X X
X - - -
X - - -
- X* X X
- X* X X
- - X** X
- - X** X
X
X
X
X
-
-
X
X
(1)
X
(2)
X