Preassembled Data Cables; Cabling Up To 100 Inverters Via An Rs 422 Interface - Fronius IG 300 Bedienungsanleitung

Preassembled The following preassembled data cables are available from Fronius:
data cables -
-
-
The cables listed above are 8-pin, 1:1 LAN network cables, shielded and twisted, including
RJ 45 plugs.
IMPORTANT! Data cables are not UV resistant. They should be protected from sunlight
when laid outdoors.
Cabling Up to 100
Inverters via an
RS 422 Interface
In this system version, each "OUT" socket of the previous DATCOM device must be con-
nected to the "IN" socket of the next DATCOM device. The total individual lengths of all
connection cables should not exceed 1000 m (3280 ft. 10 in.).
Termination Plugs
CAT5 cable 1 m ... 43,0004,2435
CAT5 cable 20 m ... 43,0004,2434
CAT5 cable 60 m ... 43,0004,2436
NOTE! When installing cabling for data communication components, follow the
instructions in leaflet 42,0410,1804. Either download the leaflet 42,0410,1804
from the Fronius Homepage (www.fronius.com / Solar Electronics / Info & Sup-
port / Third-party Downloads / Fronius Interface /) or request it from Fronius Tech-
nical Support.
- The termination plug at the last free in-
verter "IN" input
143