0X9F - Detailed Description And Example Of "Remote Ctrl Cmd Id" 0X07 - Fronius IG 300 Bedienungsanleitung

0x9F - Detailed
Query:
Description and
Start Length
Example of "Re-
mote Ctrl CMD ID"
0x07
Remote Ctrl Data
Values in the 'Remote Ctrl Data' byte:
Q
abs
Q
abs
Change gradient:
Reserved data must always be 0x00.
Response:
Start Length
Device / Op-
tion
0x09 + 0x00
Num-
ber of
invert-
ers
Inverter number
Remote Ctrl Data
- specified val- Separator
ue
0x7F
NOTE! For the calculation of the Q
lution of the Q specified value is 10
abs
Q specified value: desired Q
abs
= 500).
specified value: big endian | signed int | resolution: 1 LsB = 10
Value range -32768d to +32767d
Value range limitation: The values entered may not exceed
the +Q
big endian | unsigned int | resolution: 1 LsB = 10
Value range 1-65534d / Special value: 0xFFFF is defined as
"as fast as possible"
Value range limitation for Fronius IG Plus and Fronius CL: 1-
655 (1-655 corresponds to10-6550 var/sec)
Value range limitation for Fronius Agilo 1-10000 (1-10000
corresponds to 10-100000 var/sec)
Example: Change from -1000 var (input = -100) to +1000 var
(input = +100) corresponds to a Delta of 2000. A change gra-
dient of 1000 (input = 100) entails a change from -1000 var to
+1000 var in 2 seconds (calculation: Delta/Change gradient
= 2000/1000 = 2 seconds)
Device / Op- Number
tion
variable 0x00 0x00
Number Com- Remote Ctrl
mand CMD ID
0x00 0x9F 0x07
Check-
sum
Change gradient Separator Reserved
0x7F
specified value, please note that the reso-
abs
1
[var] (example of the calculation of the
specified value = 5000 var - value in command
abs
/10 to -Q /10 of the respective inverter
max max
Com- Remote Ctrl
mand CMD ID
0x9F 0x07
Separator
0x7F
0x00
1
[var] |
1
[var] / sec |
Separator
0x7F
183