Fronius IG 300 Bedienungsanleitung Seite 153

Value Command / Query
0x30 Get phase voltage for phase 3
(phase voltage for phase 3)
0x31 Ambient temperature
(ambient temperature)
0x32 Fan rotation speed
(fan rotation speed)
0x33 Fan rotation speed
(fan rotation speed)
0x34 Fan rotation speed
(fan rotation speed)
0x35 Fan rotation speed
(fan rotation speed)
0x36 Get total energy extended
(total energy generated)
0x37 Get inverter status
(inverter status)
0x38 Get inverter status extended
(extended inverter status in-
cluding status codes)
0x39 Get phase voltage L1 to L2 -
NOW
(current L1 to L2 phase volt-
age)
0x3A Get phase voltage L1 to L2 -
NOW
(current L1 to L2 phase volt-
age)
0x3B Get phase voltage L3 to L1 -
NOW
(current L3 to L1 phase volt-
age)
* This query is only available for Fronius IG 300 / 390 / 400 / 500, Fronius IG Plus
and Fronius CL.
The availability of this query depends on the device type (for example, in a two-
phase device, queries are available for phase 1 and phase 2).
** This query is only available for Fronius IG 300 / 390 / 400 / 500, Fronius CL and
Fronius Agilo. Measured value queries result in different values depending on
the device. More detailed information can be found in the following section "De-
tails about the Inverter Measured Value Queries 0x32 - 0x34".
*** This query is only available for Fronius IG Plus and Fronius CL.
X* X* X* -
X** X** X** -
X** X** X** -
X** X** X** -
X** X** X** -
X** X** - -
- X*** X X
- X X X
- - - X
- - - -
- - - -
- - - -
X
X
X**
-
-
-
X
X
X
X
X
X
151