Broadcast Commands; General; 0X01 - "Get Version - Fronius IG 300 Bedienungsanleitung

Broadcast Commands

General

Function of Broadcast commands in a system with RS 232 interfaces (up to 100 in-
verters via RS 232 or 1 inverter with Interface Card easy):
Broadcast commands are not sent to any particular inverter in the system. A Broadcast
command
-
-
Function of Broadcast commands in a system with RS 422 interfaces (up to 100 in-
verters via RS 422):
Broadcast commands are sent to all inverters in the system. All inverters in the system re-
ply or execute the command.
Broadcast Com-
Value
mands
0x01
0x03
0x04
0x05
0x06
0x9F
0x01 - "Get ver- If the "0x01 - Get version" command is sent as a Broadcast command in a system version
sion" with up to 100 inverters via RS 232 / 1 inverter with Interface Card easy, the following is
displayed:
-
-
If the "0x01 - Get version" command is sent as a Broadcast command in a system version
with up to 100 inverters via RS 422, the following is displayed:
-
-
Available for:
up to 100 inverters
via RS 232
X
is executed by the Interface Card easy in a system with 1 inverter with Interface Card
easy
is executed by the interface unit in a system with 100 inverters via RS 232
Command
Get version (IF type and software version of IF type)
Get date time
Get active inverter (number of active inverters)
Get active sensor card (number of active sensor cards)
Get Solar Net status (network status)
Set power reduction and reactive power
which IF type is involved (interface unit)
software version of the IF type
which IF type is involved (interface unit)
the interface protocol version
1 inverter via RS
232
(IFC easy)
X
up to 100 inverters up to 100 inverters
via RS 422 via RS 422 (IG-TL,
(IG Plus/CL) Agilo)
X X
169