Herunterladen Inhalt Inhalt Diese Seite drucken

Operation With Timer (Delayed Switching On And Switching Off); A - Setting Of The Switching On Timer From Remote Controller; B - Setting Of The Switching Off Timer From Remote Controller; Switching Off For Prolonged Periods - Olimpia splendid Bi2 Air TR Hinweise Für Die Verwendung Und Pflege

Gebläsekonvektoren
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 109
3.13 -OPERATION WITH TIMER (DELAYED SWITCHING ON AND SWITCHING
OFF)
This mode allows to program the unit switching on and switching off
The delay time can be set, activated and cancelled from the remote controller.

3.13.a - Setting of the switching on timer from remote controller

a. After switching on the unit, select the operating mode, desired tempera-
ture and fan speed with which the unit will reactivate at the programmed
switching on.
Then, set the machine to Stand-By mode.
b. Press key "B8" to set the desired delay (from 1 to 24 hours) after which
the unit will switch on starting from timer confirmation.
c. If no key is pressed within 5 seconds, the timer setting function will
end automatically.
d. The remote controller display shows the countdown for switching on
while the display of the fan coil shows the message "tI".
Once the set time passes, the unit will start with the last selected set-
tings.
3.13.b - Setting of the switching off timer from remote controller
a. With the unit set to any operating mode, press key "B9" to set the
desired delay (from 1 to 24 hours) after which the unit will switch off
starting from timer confirmation.
b. If no key is pressed within 5 seconds, the timer setting function will
end automatically.
d. The remote controller display shows the countdown for switching off
while the display of the fan coil shows the message "tI".
Once the set time passes, the unit will switch off.

3.14 - SWITCHING OFF FOR PROLONGED PERIODS

If the appliance is not used for a prolonged period of time, it is necessary to carry out the following operations:
a. Set the main switch of the system to "off".
b. Close the water valves.
c. If the risk of frost exists, make sure that antifreeze liquid has been added to the system, empty the system
otherwise.
The antifreeze function is not active.
EN - 24
6.0 H
0 h
6.0 H
3.0 H
0 h
3.0 H

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

B0872

Inhaltsverzeichnis